How to use MagicResin's 2" Deep Pour & Casting Resin
Want to learn how to use our Table Top & Coating resin instead? Click here.
For optimal results, make sure that the temperature of the room and the resin is around 21-24c (70-75f). The thicker the pour, the lower the temperature should be for the first several hours.
Tip: If for any reason your bottles are cold, you can put them in warm water to accelerate the process. Ensure that the product acclimates to room temperature prior to usage.
A single pour should be no more than 2” of resin, else you will need to do multiple pours.
To purchase table top resin, check out our Table Top & Coating Resin.
STEP 1: MEASURE
Into a mixing cup, pour twice the amount of resin (A) for each measurement of hardener (B) (2:1 ratio). Ex.: 500ml of resin (A) with 250ml of hardener (B).
STEP 2: MIX
Stir both parts together for 4-5 minutes. Make sure to scrap the sides while stirring. Once done, you have around 1 hour of working time.
STEP 3: POUR
Make sure that your project is leveled and pour the resin on it.
Tip: 15 minutes after pouring, you can quickly pass a blow torch a few inches over the resin to pop air bubbles.
STEP 4: WAIT
Your project will be fully cured after 4 days, but we recommend to wait a full 7 days before putting items on it.
The remaining step is to enjoy your amazing creation!